Title 24 and Commercial HVAC Replacements: What Changes When You Swap a Unit
Title 24 treats a replacement as an alteration. That changes the equipment, the controls and the paperwork on even a simple swap.
Replacement is an alteration under Title 24
California’s Building Energy Efficiency Standards apply to altered systems, not just new buildings. Swapping a rooftop unit, boiler or chiller brings the new equipment and its controls under the current code.
What it usually means in practice
- Minimum efficiency for the new equipment.
- Economizers and related controls on many rooftop units.
- Thermostat, fan and setpoint control requirements.
- Acceptance tests and compliance forms filed with the permit.
Why owners are surprised
The old unit was installed under an older code. The replacement has to meet today’s rules, so a quote that only prices the box can miss controls and testing that the inspector will ask about.
How B&B handles it
Requirements are identified during the survey and written into the scope, so the equipment, controls and acceptance documentation arrive together.
Three places Title 24 shows up on a replacement
Owners meet Title 24 in the equipment selection, the controls and the paperwork. Each one can change a quote that only priced the box.
- Equipment: the new unit has to meet current minimum efficiency, which rules out some direct replacements.
- Controls: economizers, fan control, thermostat and setback requirements depend on the equipment and the building.
- Documentation: compliance forms are filed with the permit and acceptance tests are performed and recorded.
Why the old unit is not the template
The equipment being replaced was installed under an earlier code. Copying its specification into a new order can produce a unit that fails plan review or inspection, which is why B&B’s survey records what the code requires of the replacement before anything is selected.
How B&B builds it into the scope
The survey identifies the applicable requirements, the quote lists the controls and tests they call for, and the submittal shows the inspector the compliance documents before the equipment is set. The owner sees the full scope once, at the start.
Frequently Asked Questions
Does Title 24 apply to a repair?
Component repairs in kind generally do not trigger it. Replacing the equipment does.
What is an acceptance test?
A field test confirming specified controls and equipment perform as the code requires, documented on the compliance forms.
Is Title 24 only for new buildings?
No. Alterations and additions to existing buildings are covered.
Who performs acceptance tests?
A qualified technician performs the field tests the code specifies and records them on the compliance forms; B&B handles this on its projects.
Does Title 24 apply to a chiller or cooling tower replacement?
Yes where the code’s efficiency and controls provisions cover the equipment and the alteration; the survey confirms what applies to the specific plant.
Terms used in this guide
- Mechanical Permit
- A mechanical permit is the local building-department authorization required before installing, replacing, or substantially modifying HVAC equipment in a commercial building, ensuring the work is inspected against current code. Requirements vary by city and jurisdiction within San Diego County.
- Title 24 (California Energy Code)
- Title 24 (Part 6) is California's statewide building energy efficiency code, which sets minimum efficiency and installation standards for HVAC equipment installed in the state. A full commercial HVAC replacement is generally required to meet the current Title 24 standard, even if the equipment being removed was installed under an older code cycle.
- Crane Lift (Rooftop Equipment Pick)
- A crane lift sets or removes rooftop mechanical equipment from a mobile crane positioned on the street or a parking area. It needs a lift plan, a street or lane closure permit where the crane sits in the right-of-way, and a tight schedule with the rigging crew.
- Variable Frequency Drive (VFD)
- A variable frequency drive controls a motor's speed by varying the electrical frequency it receives, so a pump or fan runs at the speed the load calls for instead of full speed all the time. Drives are common on tower fans, condenser water pumps and air handler fans.
Next step
HVAC Retrofit for Commercial BuildingsAbout this service
HVAC Services →Talk to a real technician.
Tell us what's going on and our San Diego team will reach out. For emergencies, call us 24/7 at (619) 713-0400.
Call us 24/7(619) 713-0400- 24/7 Emergency Service
- Licensed & Insured
- 5.0★ Rated on Google
- Based in Lakeside, CA
10031 Maine Ave, Lakeside, CA 92040
Request your service
No obligation. We never sell your info.
